Wednesday, April 28, 2010

Defensive Driving Online Training Guide

Training is the only difference between an average driver and a good one and that's the main reason behind completing a defensive driving course so as to arm yourself with the knowledge and skills required to anticipate driving dangers, how to avoid them and also keep yourself up to date with the latest road laws.
What is defensive driving anyway?
It is a technique used to significantly reduce the risks associated with driving your car or motorcycle by anticipating and identifying potential hazards and adjusting your driving accordingly to suit the circumstances well before they happen.
Patience, training and good concentration are required to effectively benefit from defensive driving, so by becoming a student of an accredited online defensive driving course and incorporating the visual training into yoonline driving safety course, defensive driving course online, workplace safety training<br />ur driving behavior, it could ultimately save your life!
Gathering the right information and undergoing professional defensive driver training, will help to reduce the likelihood of a serious or fatal accident. It will certainly assist you in passing your driver’s license test and may also save you some money by reducing your vehicle insurance premium.
You can now dismiss a traffic ticket online.
If you have not taken a defensive driving course for some time and are not fully up to date with the current road laws, then it is more than likely you will receive a traffic ticket or moving violation at some point. If you have already been directed by a court to attend a driving safety course, many courts in the United States will nowadays dismiss your ticket and protect your driving record if you complete an approved defensive driving course online.
Here are some general defensive driving tips to help you drive more safely.
When driving, particularly in traffic conditions look 10 - 15 seconds down the road to anticipate any trouble, as this will give you enough time to adjust your driving.
Maintain a 2-3 second gap between your car and the one in front to allow sufficient reaction time and increase the gap as your speed rises.
Be aware of cars that are sitting to close to you by scanning your rear view mirrors every 5 - 10 seconds and increase the distance between if you can accelerate or move into another lane. If you have to brake suddenly and a car is too close, their reaction time is reduced and could crash into the rear of you.
Be aware of what is happening on both sides of the road, look under parked cars for feet to anticipate a pedestrian, child or even a dog running out in front of you. Also glance down any side streets, making sure other vehicles have seen you and will stop and give way. Watch for people in parked cars opening their doors or pulling out of parking spots.

For more information: Defensive Driving Course Online and Online Driving Safety Course

Tuesday, April 27, 2010

How to search the correct OSHA Safety Training

Require to get an OSHA card but not definite of where to start? Certain states are now requiring OSHA training. So how do you know what kind of course you need?
Here are the questions you require to ask. First, do you require under the most commonly requested OSHA course: the OSHA 10-hour Outreach Training for the Construction Industry? Most recently, 7 states have adopted laws to require construction workers, contractors and employers to get their OSHA 10 hour Outreach card. Those states include:

• Connecticut
• Massachusetts
• Missouri
• Nevada
• New Hampshire
• New York
• Rhode Island
Other states that have frequent enrollments in OSHA courses are California, Ohio, Florida, Georgia, New Jersey and Texas.

Or do you fall under what is called the "General Industry" umbrella? General Industry OSHA Outreach courses contain topics such as Blood borne Pathogens, Personal Protective Equipment, Material Handling, Walking and Working Surfaces, Ergonomics and more.

Generally, most workers need either the 10 or 30-hour Outreach card. Both of these are offered for the Construction or General Industry. Even if you are not required by law, it may be required by your employer or for a future project.

Having an OSHA card is an asset to those working in any industry: from the medical field to theme parks. Even if your state or job does not require it, for a low cost it may be beneficial to get OSHA training and put it on your resume.
The other main type of OSHA training is OSHA trainer certification courses. These include, but are not limited to, 510 and 511 Train the Trainer courses. This training enables the student to take the required OSHA trainer courses and become certified to train employees in the 10 or 30 hour Outreach Training. The 510 course would pre-qualify you for Construction training and the 511 course would pre-qualify you for General Industry Training. After that, you would complete the 500 or 501 courses to get your OSHA Train the Trainer certification.

So how do you find the training? There are hundreds of trainers that hold classroom courses, as well as OSHA Training Institute Education Centers across the nation. However, online training is more accessible and the best option for those not able to attend a live classroom course. More people are choosing online training to cut travel costs, time off work and because live classroom courses for the required states fill up quickly.

When you do a search online, make sure you find a provider that offers OSHA accepted courses. Generally the website will say OSHA accepted, authorized or accredited. USF OSHA offers online training that is quite lower in price than the live versions. And you can also find coupons online.
Also, remember to call the training provider for bulk discounts over the phone if you have multiple sign-ups. If you've registered for the online course, you will generally have 6 months to complete. There is a course trainer available to you for any questions you may have. At the end of the course is a final exam which you have to pass with an 70 or higher in order to get your certificate.

Most providers deliver your OSHA card and/or certificate within 10 business days. You may be able to get it sooner if you request and expedite from the provider.
For more information please visit here: OSHA Safety Training Video, OSHA Safety Course

Friday, April 23, 2010

Electrical Safety in the place of work

The work situation can be worrying and sometimes overwhelming. Employers may sometimes be too bogged down in projects to notice the kinds of hazards that need attention. For this reason, employers should hire maintenance personnel to take care of problems that may result in accidents or injuries for employees.
Electrical safety is a very significant in the work situation. Employees of offices, industrial plants, and construction zones all face electrical hazards every day on the job. Electricity is especially dangerous due to its sudden nature. different fires, electricity will come out in a spark, shock, or arc and at an extremely fast rate.

Workers who have been injured in an electrical-related accident may be eligible to receive compensation. Families of workers who have died due to an accident may also be eligible to receive a portion of the amount of money that used to be earned by the worker. Employers must protect employees from exposure to electricity in order to prevent accidents like these from happening.

At times, employees speak to their employers about such hazards, but unfortunately some employers remain unresponsive. If an accident arises due to the employer's lack of response, an expert lawyer in workers' compensation and liability will be able to help.
Safety Tips:

The best electricity accident is the one that never happens. Here are a few tips to keeping you and fellow coworkers safe from an electrical accident:

-Heed warning signs: If you stench a bad odor coming from electrical outlets or areas, hear high-pitched noises or drones from areas, or if you notice electricity going on and off, consider hiring an electrician to take care of the problem.

-Keep electrical cords in good condition: Electrical cords can burn the area around the cord and cause a fire. Only purchase extension cords or surge protectors that have passed safety standards.

-Ground Fault Circuit Interrupter outlets in wet areas: These outlets are programmed to stop the flow of electricity if the sensor notices a spike in electrical output.

-Do not overload an outlet: People sometimes "daisy chain" surge protectors and test the strengths of a circuit breaker.

-Unplug unused appliances: Keep an electrical accident from happening whenever possible. Unplugging unused appliances also saves on electricity costs.

-Cover exposed wiring: Have an electrician cover any exposed wiring and make sure the unit itself is up to code.

FOr More Information Please visit: Fire Safety Training and Fire Safety Training Video

Sunday, April 18, 2010

How To - Construction Safety Assessment

Construction Safety Inspections are hardly ever looked forward to. In fact, a lot of construction workers feel scared by the prospect of their building site being inspected by anyone. The fact that inspections rarely result in closure of a site is beside the point. If you want to be sure you'll pass your next safety inspection, just follow these simple rules and you'll be best friends with your inspector.

Put first aid first!

Health and safety policy need a simple but effective procedure to follow in order to keep your first aid up to scratch. A Construction Safety Inspection will almost always begin with your first aid box. Identifying and assessing a first aid box is an important part of keeping your site safe. The most important things to consider when assessing your first aid is the location: Is it easily available? The contents of your first aid box should be appropriate to your grade of site and, importantly, in date. This is something often overlooked by site managers.

Fire safety

Fire extinguishers are an essential part of any Construction Safety Inspection. You should make sure your fire extinguishers are easily available and have been inspected. Similarly, fire exits should be well posted and understood by all on site personnel. Any exits from the site, particularly fire exits should be easy to negotiate as well. Never block a fire exit. Ever.

Equipment storage and use

During a Construction Safety Inspection, many items of equipment will be assessed. This includes storage, use and condition. If you work on a construction site, the chances are you will have to use equipment to gain access to higher areas. Any ladders and lifting equipment must be properly latched and in excellent condition. A frayed or inappropriate rope is something likely to arouse suspicion in any Construction Site Inspection. Similarly, any cutting or drilling equipment must be in proper condition. For many site managers, this is something overlooked, as the cost of replacing tools can be prohibitive. Remember, a poor tool can be a nasty hazard!

General site quality

While many construction sites are, by their very nature, not the cleanest of places, they should always maintain a level of workable tidiness and basic hygiene so as not to give rise to any health and safety issues. Loose chippings and debris should be effectively dealt with. A certain amount will be tolerated, but as soon as it becomes a tripping hazard or unsafe to walk on, a Construction Safety Inspection will cite it. Stairs and access routes will be particularly identified. Also, if your site has any digs present, these will be examined very carefully for any signs of cave ins or dangerous procedures.

Shock treatment

Do your site workers know what to do in the event of an electrical medical emergency? It's questions like this which any Construction Safety Inspection will bring to the fore. Electricity is particularly dangerous in construction, as there is always the possibility of miscommunication and mistakes resulting in the electrocution of site workers or visitors. Making sure all tools are grounded and double insulated is a good start, but you will also have to consider the condition of any electrical paneling and wiring with any Construction Safety Inspection.

For more Information Please visit: Construction Safety Equipment and Construction Safety Training Video

Wednesday, April 14, 2010

How Safety Training Can Save Your Business Money

Running a business is one of the most demanding tasks in the world. One has to be careful about various aspects of the business and also take into consideration various factors affecting the business and the business environment. The concern becomes even greater if the business involves several employees and is not a sole proprietorship such as a factory, firm, or a company.

Many people focus on profit maximization and lowering the cost of production in their firms and companies. However, many people ignore some of the basic factors that might directly or indirectly be related to the profits and smooth running of the business. Safety training is one of such factors, which are highly over looked by many entrepreneurs.

Many countries have certain regulations regarding the safety of employees. These regulations also stress on reasonably safe working environment for the employees to prevent any unfortunate incidents from occurring. Safety training is very important to comply with these safety regulations, as it helps train the employees to use equipments safely and also trains them to save themselves in case of some misfortunate accident.

In one way, safety training is also related with profit maximization. The reason is that if the employees are properly trained to operate the safety equipment and also to prevent any serious loss in case of some accident then the company would be able to lower its reserves for employee's insurance.

By providing a safe environment and also by giving the employees proper training about work place safety, one can certainly minimise any losses caused to the employees and thus ensure smooth running of the business and also reduce the reserves to compensate employee losses. The company might also have to pay lesser employee insurance if proper safety training is given to them to save them from any unforeseen circumstances.

For example, if in a factory, the employees work in an environment, which might be hazardous. Then if the employees are properly trained to deal with any unfavourable situation, the losses caused to the employees would be much less; they would be able to handle themselves better in these unfavourable situations.

There are many workplace safety-training programs, which one can follow, and would provide the necessary safety training required by the employees. These programs do not cost much and can be conducted very easily. There are many training videos also available online for downloading which would demonstrate various safety procedures and allow the managers to train their employees to deal with certain situations.

There are a number of ways by which safety training can be given to the employees. Almost all employees need general trainings such as evacuation training in case of some mishap like fire or earthquake etc. This sort of training can be given on-site to all the employees. However, there are certain employees who need to handle some particular type of equipment, the training of which can be given by sending them to some training camps, where they would learn all the safety procedures to operate the equipment safely.